Rigid Pour Foam

is a polyurethane blend that is filled in place into a cavity whereafter it foams.

The variety of products and quality types is very wide.
From the light types - density down to 8 kg/m³ up to the heavy types - density up to 300 kg/m³ of free rise foam. By overpacking you can further vary density and quality. Integral skin foams are also available.
The blowing agents are mainly carbon dioxide alone, or together with other chemicals such as fluorocarbons or pentanes. With respect to fluorocarbons there are legal regulations to be considered.

Some products are flame-retarded either direct in the polyurethane or by additives. Several products have certificates from Technical Institutes and Type Approval certificates from  Det Norske Veritas, internationally recognized Nordic Certification Institute. 

All types of mixing equipment as well as hand blends can be used.
Again due to the very big variety, please contact us for details. 

UF – 1605	Water based system Pour foam	normal
UF – 1705	Water based system Light foam - packaging	normal
UF – 1805	Water and HCFC based system  Light foam  - Fireretardant	DIN 4102   B2
UF – 1905	Water based system   Pour foam fireretardant	DIN 4102   B2
UF – 2041	Water and HCFC based system  Pour foam	normal
UF – 2045	Water and HFC based system Pour foam	normal
UF – 2065	Water and HFC based system Pour foam	normal
UF – 2141	Water and HCFC based system Pour foam - Fireretardant	DIN 4102   B2
UF – 2145	Water and HCFC based system Pour foam - Fireretardant	DIN 4102   B2
UF – 2165	Water and HFC based system Pour foam - Fireretardant	DIN 4102   B2
UF – 2241	Water and HCFC based system Pour foam -  Fireretardant -150°C / +150°C	BS 476 class 1
UF – 4549	Water and cyclopentane Pour foam District heating  (140°C)	normal

All systems can be processed with normal equipment.